106 KETTENFLUID PLUS106

106 KETTENFLUID PLUS

Designed for long-lasting lubrication

Behind the features of the product is a carefully crafted recipe of several components. For cleansing and de-rusting organic solvents provide ester-based solvents with high dissolving power. The solvents also ensure penetration into the closest matches. Gradual evaporation of the solvent components leads to the whereabouts of a dry, non-sticky lubricating film, which nevertheless adheres firmly to the surface. Due to the good adhesion, the lubricating film does not spin off, which means a long service life of the lubrication and makes it possible to significantly extend the lubrication intervals. The lubricating film of specially developed polymers also withstands high mechanical loads and the freedom from tack avoids the deposition of dust and dirt on the surface. Of course, the tightly closed, very well adhering lubricating film also provides very good corrosion protection.

  • Cleans and lubricates effectively and permanently
  • Dissolves resin
  • Low dust adhesion
  • Protects against corrosion

Ideal application areas

  • Cleans
  • Lubricates
  • Protects

Application

Application advices

  • Permanently effective lubrication is ensured by a new lubricant combination.
  • Low dirt adhesion. A grip-proof, non-sticking lubricating film prevents excessive contamination inside the chain.
  • The Innobike brush attachment provides mechanical support during cleaning and ensures targeted introduction of the lubricant.
  • By using the brush avoid spraying.
  • Avoid contact with brakes of any kind; Loss of braking force possible.
  • 106 KETTENFLUID PLUS infiltrates moisture so the chain can be used immediately after bike wash.

Step-by-step instructions

  • Attach the 106 KETTENFLUID PLUS with a brush attachment to the rear small pinion.
  • Turn the pedals backwards in the freewheel and spray continuously until the 106 KETTENFLUID PLUS drips on the large bottom bracket pinion.
  • Allow 4-6 hours to work. During this time, the cleaner contained in the fluid evaporates and a thin, non-abrasive lubricating film remains on the chain.

Frequently asked Questions (FAQ)

What should a perfect care of the chain look like?

The most important aspect is of course the lubrication! When lubricating, you must be careful that there are no foreign objects on the chain, this can be abrasion, gummy old oil or even environmental influences (dust, gravel, fine sand). Therefore, before a good and reliable cleaning of the chain is imperative!

What happens if I do not clean or just "reload" over and over again?

Removing foreign matter or resinous oil automatically means higher friction and thus more wear. In addition, they ensure that the chain is stiff or no longer moves so smoothly. This in turn is enormously important for good gear changes.

How do I clean my chain the best way?

For one thing, it is not enough to wipe off the chain with a cloth before lubrication, because the friction "plays" mainly in the interior of a chain and the dirt deposits itself here. On the other hand, it is not enough to clean only the chain, but best still the pinion packages (rear / front) and the wheels of the circuit! Especially here, the not removed dirt builds up. Some take special cleaners, a chain cleaning device or immediately remove the chain / pinion and put this for example in diesel. Of course, these types of cleaning each have its advantages and disadvantages. Our philosophy: cleaning and lubricating in one operation!

The 106 KETTENFLUID PLUS consists of a combination of solvents (cleaning-active and high-penetration) and our additive, which is homogeneously incorporated into the solvent. In the original state, the additive would be too viscous to penetrate into the critical areas of the inner chain bearings and supply them with lubricant. In addition to its role as a carrier, it also takes care of cleaning as a solvent combination. It rinses old gummy substances, dust and dirt from and out of the chain. The solvent evaporates leaving behind a thin film of lubricant on and in the chain (where it belongs).

Our additional plus is the additional lubrication.

Benefits of the innobike brush:

  • Supportive cleaning of the chain and pinion
  • More targeted spraying
  • Less consumption
  • No mist

Due to the solvent in the 106 KETTENFLUID PLUS, the brush does not stick or clog and therefore remains free.

Advantages of the product:

  • No extra cleaner needed
  • ENORMOUS TIME SAVING by cleaning and lubricating in one operation
  • With every relubrication, the chain cleans itself automatically
  • Easy cleaning of the chain / pinion / gearshift
  • Absorbs significantly less dust and dirt
  • Cost savings (in the longer term) due to less wear
  • Verharzungsfrei
  • Solvent does not attack rubber and paint


Conclusion:
It is difficult to compare the 106 KETTENFLUID PLUS with other chain oils because most users focus on lubrication only. The chain is rarely really clean. In addition, the biker in the open air (whether on the road or off road) has always dust and dirt on his chain. In combination with oil this will become a "chain killer". We have a different approach of greasing and the principle: CLEAN AND LUBRICATE in one go! This means more consumption but always a reliable cleaning. This should be taken into account in a cost and performance comparison.