2 x 300ml Can

innobike Fluid Bundle

€31.05

€24.95

-20 %

Content: 0.6 (€41.58* / 1 Liter)

Prices incl. VAT plus shipping costs

Available, delivery time 1-3 days

Product number: OA-105106

Product information "innobike Fluid Bundle"

The concentrated power for your chain!

Set consisting of

• 105 HIGH-TECH CHAIN FLUID 300ml
• 106 CHAIN FLUID Plus 300ml

105 High Tech Kettenfluid

It lubricates and lubricates and lubricates. But that's not all, because our 105 high-tech chain fluid, aka 105, can do a lot more. We are talking about a bicycle chain oil including bicycle chain lubrication and a bicycle cleaner. The technical basis comes from our industrial sector and has also been in use in large machines for many years. Thanks to our technology, these never stand still and our chain fluid also ensures more longevity and more efficient progress.

But first things first, starting with a little technology and chemistry. Our bicycle oil is fully synthetic. In direct comparison with a mineral oil, this results in a noticeably better lubricating performance, but the production and refinement is also much more complex. Synthetic bicycle chain oil can be perfectly combined with additives and offers considerable added value compared to simple mineral oil products. So far, so good, but let's go one step further.

The 105 high tech chain fluid is not only suitable for oiling bike chains but also for bike care. If you want to buy a good bicycle chain oil, you should know that we have also added detergent substances. In other words, it is not only lubricated, but also cleaned at the same time, which a simple bicycle chain oil cannot do. We offer a bicycle chain cleaner and bicycle chain lubrication in one and save - if you want to put it that way - one work step.

The washing substances have been specially optimized for use on bicycle chains. We also call this extremely penetrating, meaning that our bike cleaner really penetrates into every corner and does its job there. Inner chain bearings, chain drive bushings, tight fits - all particles that have deposited are removed. It goes without saying that cleaning is also carried out outdoors.

What follows the cleaning can be effectively referred to as “pure magic”. Don't worry: we don't want to exaggerate and just point out factually that the solvent in our bike chain fluid evaporates after around four to six hours and the chain is clean again. What remains is the bicycle chain lubrication, which takes place through a thin film of lubricant and minimizes any further dirt adhesion. What is special about it is that it is an inner bearing lubrication and not only the surface can be enjoyed.

We would like to emphasize this aspect again, because not every cyclist is so familiar with the subject. A bicycle chain oil is good if it lubricates the parts that work on a chain. In other words, the chain doesn't need to shine and look chic on the outside, but rather it has to run and run and run. This is possible if the inner bearings are lubricated and the lubricant actually "penetrates" the entire chain.

What sounds complicated couldn't be easier to use. Our bicycle chain oil, including bicycle chain lubrication and bicycle cleaner, takes a maximum of five minutes of your time. And no: you don't have to remove the chain, you don't need a petrol bath, no special cleaning device (although we recommend our brush) and no rag. Just you, your chain and the chain oil - that's it!

By the way, you can also use our bicycle oil on other moving parts. The brakes are excluded. The Bavarian Cycling Association has been relying on our top product for around ten years. Hopefully you will soon too, because you will quickly notice the difference and be amazed.

106 Kettenfluid Plus

Fictitious dialogue from innobike's development department. Question: "Can our tried and tested 105 chain fluid be made even better?" Answer: "In principle, yes, or at least it can be varied cleverly." The solution is the 106 Chain Fluid Plus and thus a bike chain fluid that focuses on the aspect of lubricant.

For this purpose, we have changed the recipe a little and used more lubricant and a little less detergent. Why the whole thing? Quite simply because those who buy bicycle chain oil show very different usage patterns. Above all, those who want a regularly cleaned and clean chain may stick with the 105.

The 106 Kettenfluid Plus is bike care for long journeys and acts as a perfect lubricant and corrosion protection. You don't need it that often because it lubricates much better and if you also want to clean, simply use our Fluid Bundle together with the tried and tested 105.

Correctly recognized: the 106 Kettenfluid Plus was originally developed as a supplement to the 105 and has now proven itself as a long-distance product. The many advantages offered by all of our products also apply here. When oiling bicycle chains, we use our own lubrication technology and ensure that the chain is oiled in and not on the chain. The bicycle chain lubrication is therefore completely sustainable and of course handling is just as easy as with all of our other products. You don't need to remove your chain, no gasoline bath or cleaning device, you can just get started and be amazed at the enormous effect.